My kit finally arrived from Australia so I was really impatient to see it after such a long travel. First obstacle was to get it out of the truck and through the doors - be advised, the crate is close to 5 meters long and over 300 kg heavy, you should plan well your unloading - luckily someone next door helped me with a forklift and my doors were large enough, barely... the crate fit through the doors just 2 centimeters on each side). The crate finally inside (left it just near the door since the forklift had some problems advancing) I started unpacking it and finally I managed to see with my own eyes what I have seen in other people's pictures before... my kit neatly packed inside the crate. Next step was to make an inventory of all parts I have received (the crate was damaged during transport and some parts are missing), I had difficulties in correctly identifying some of the parts so I thought since I already went through this, it would be useful to post here the parts name as written in the dispatch list and a photo of them, might come in handy for other people who buy the kit. The order in which I will post the photos is the order in which I found them in the dispatch list, starting with fuselage parts then wing parts (please bear in mind that some of the parts are missing right now due to the damage received during transport). FUSELAGE FULLY WELDED: (of course I could not help my self to place the chairs inside ) UNDERCARRIAGE LEGS PORT & STARBOARD: (2 pieces; Exploded view: Drawing SA7, item 1) UNDERCARRIAGE TENSION STRUTS: (2 pieces; Exploded view: Drawing SA7, item 10) Poly Block Retaining Tubes Upper: (2 pieces, Exploded view: Drawing SA7, item 8) Poly Block Retaining Tubes Lower: (2 pieces, Exploded view: Drawing SA7, item 8) Poly Block Springs 3 each side: (6 pieces, Exploded view: Drawing SA7, item 11) HORIZONTAL STABILIZER: (1 piece, Exploded view: Drawing ACB12, item 1) HORIZONTAL STABILIZER STRUT TUBES: (4 pieces, Exploded view: Drawing ACB12, item 2) RUDDER: (1 piece, Exploded view: Drawing ACB11, item 1) ELEVATOR: (1 piece, Exploded view: Drawing ACB13, item 1) DOORS PORT & STARBOARD WELDED FRAMES: (2 pieces, Exploded view: Drawing SA4, item 1) ALLY Sht INSTRUMENT COWLS, KICK & BOTTOM, COVERS and TURTLE DECK & FIN FAIRINGS: HEADRACK COVER: (2 pieces, Exploded view: Drawing ACB21, item ) SEAT Moulded fibreglass: (2 pieces, Exploded view: Drawing ACB43, item 1) LIFT STRUTS-REAR SMALLER SECTION: (2 pieces, Exploded view: Drawing SA2, item 2) ROD END BEARINGS-LIFT STRUT ENDS TO WINGS: (4 pieces, Exploded view: Drawing SA2, item 2) POLYCARB WSCREEN, DOOR, SKYLIGHT: (3 pieces, Exploded view: Drawings ACB35-1, SA4-2, ACB21-1) BRAKE SPACERS: (2 pieces, Exploded view: Drawing SA7, item 25) SPACERS-WHEEL AXLES: (2 pieces, Exploded view: Drawing SA7, item 7) PEDALS-RUDDER adjustable foot rests: (4 pieces, Exploded view: Drawing ACB7, items 2 & 3) PEDALS-RUDDER CROSS BARS: (2 pieces, no information given regarding exploded view) LIFT STRUT HINGE ASSEMBLY Lower to fuselage: (2 pieces, Exploded view: Drawing SA2, item 3) LIFT STRUT BRACE Upper to wing: (2 pieces, Exploded view: Drawing SA2, item 4) ENGINE MOUNTING FRAME: (1 piece, Exploded view: Drawing ACB28, item 2) ENG COWL Fibreglass: (2 pieces, Exploded view: Drawing ACB41, items 1&2) SPRING-TAILWHEEL Leaf type: (2 pieces, Exploded view: Drawing ACB1A, item 2) CABLE - RUDDERS 0.125in: (1 piece, Exploded view: Drawing SA10, item 1) PLATES-RUDDER ADJUSTERS: (2 pieces, Exploded view: Drawing ACB7, item 6) TAIL SPRING GUIDE & TWHEEL SPACER TUBE: (2 pieces, Exploded view: Drawing ACB1, item 19) TAILWHEEL ASSEMBLY: (2 pieces, Exploded view: Drawing ACB1A, item 24) FORWARD ELEVATOR PUSH TUBE: (1 piece, Exploded view: Drawing SA11, item 4) CONTROL COLUMN JOYSTICK: (1 piece, Exploded view: Drawing SA11, item 2) NYLON BEARING BLOCKS-CONTROL COLUMN: (2 pairs, Exploded view: Drawing SA11, items 6 & 7) PENDULUM FOR CONTROL COLUMN: (1 piece, Exploded view: no info) PUSH PULL TUBE 10ft Aluminium: (1 piece, Exploded view: Drawing SA9, item 3) ALUMINIUM BOSS ENDS: (2 pieces, Exploded view: Drawing SA9, items 2 & 5) PUSH-PULL TUBE NYLON BUSH: (1 piece, Exploded view: Drawing SA9, item 4) FORK ENDS FRONT & REAR: (2 pieces, Exploded view: Drawing SA9, items 1 & 6) FLIGHT CONTROL TORQUE TUBE: (1 piece, Exploded view: Drawing SA11, item 1) JURY STRUT KIT: (10 pieces, Exploded view: no info) [b]Shaped SPAR FINGERS:[/b] (8 pieces, Exploded view: Drawing WM3, items 1 & 6) [img]http://aeropup-builder.com/wp-admin/post.php?post=283&action-edit[/img] [b]AL ALLOY-INFILL PANELS:[/b] (1 piece, Exploded view: Drawing WM4, items 2 & 3) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W002-AL-ALLOY-INFILL-PANELS.jpg[/img] [b]AILERON RIBS ALLY .020:[/b] (12 pieces, Exploded view: Drawing WM4, items 2 & 3) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W004-AILERON-RIBS-ALLY-.020.jpg[/img] [b]AILERON RIBS .040in:[/b] (4 pieces, Exploded view: Drawing WM4, items 4 & 5) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W005-AILERON-RIBS-.040in.jpg[/img] [b]FLAP SKINS FORMED SHAPE:[/b] (2 pieces, Exploded view: Drawing SM1A, item 1) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W006-FLAP-SKINS-FORMED-SHAPE.jpg[/img] [b]FLAP RIBS .020in:[/b] (10 pieces, Exploded view: Drawing WM4C, items 31 & 32) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W008-FLAP-RIBS-.020in.jpg[/img] [b]FLAP RIBS .040in:[/b] (4 pieces, Exploded view: Drawing WM4C, items 33 & 34) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W007-FLAP-RIBS-.040in.jpg[/img] [b]Flap Cable Lever:[/b] (1 piece, Exploded view: no info) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W009-Flap-Cable-Lever.jpg[/img] [b]BOX SUB SPARS ALLY SHEET FORMED:[/b] (4 pieces, Exploded view: Drawing WM4C, item 19) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W010-BOX-SUB-SPARS-ALLY-SHEET-FORMED.jpg[/img] [b]12ft LENGTH .625in OD AL TUBE DRAG ANTIDRAG:[/b] (2 pieces, Exploded view: Drawing WM1, item 2) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W011-12ft-LENGTH-.625in-OD-AL-TUBE-DRAG-ANTIDRAG.jpg[/img] [b]2540m .375in OD AL TUBE FAB BRACES:[/b] (no info) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W012-2540m-.375in-OD-AL-TUBE-FAB-BRACES.jpg[/img] [b]FRONT SPARS vertical webbed section:[/b] (2 pieces, Exploded view: Drawing WM3, item 7) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W014-FRONT-SPARS-vertical-webbed-section.jpg[/img] [b]REAR SPARS:[/b] (4 pieces, Exploded view: Drawing WM3, item 8) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W015-REAR-SPARS.jpg[/img] [b]WING TIPS fibreglass port & starboard:[/b] (no info) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W016-WING-TIPS-fibreglass-port-starboard.jpg[/img] [b]12ft x 0.75 x 0.5in SHAPED WING STRINGERS:[/b] (4 pieces, Exploded view: Drawing TM2, items 1 & 4) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W017-12ft-x-0.75-x-0.5in-SHAPED-WING-STRINGERS.jpg[/img] [b]RIB CAP STRIPS PLY:[/b] (48 pieces, Exploded view: Drawing TM1, items 6 & 9) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W018-RIB-CAP-STRIPS-PLY.jpg[/img] [b]WING RIBS PLY:[/b] (24 pieces, Exploded view: Drawing TM1, item 1) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W019-WING-RIBS-PLY.jpg[/img] [b]RIB BRACE POCKETS:[/b] (no info) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W020-RIB-BRACE-POCKETS.jpg[/img] [b]AILERON & FLAP HORNS:[/b] (4 pieces, Exploded view: Drawing SM1, item 6) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W021-AILERON-FLAP-HORNS.jpg[/img] [b]FUEL TANKS:[/b] (2 pieces, Exploded view: Drawing WM4, item 9) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W022a-FUEL-TANKS.jpg[/img] [b]FUEL TANK CAPS:[/b] [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W022b-FUEL-TANK-CAPS.jpg[/img] [b]CABLES and ROD END BEARINGS-FOR AILERON & FLAP CABLES:[/b] (2+2 pieces, Exploded view: Drawing WM7, item 1) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W023-25-CABLES-and-ROD-END-BEARINGS-FOR-AILERON-FLAP-CABLES.jpg[/img] [b]LEADING EDGES SHEET:[/b] (no info) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W024-LEADING-EDGES-SHEET.jpg[/img] [b]ROD END BEARINGS-FOR AILERON & FLAP CABLES Tuthill:[/b] (8 pieces, Exploded view: Drawing WM7, item 2) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W023-25-CABLES-and-ROD-END-BEARINGS-FOR-AILERON-FLAP-CABLES.jpg[/img] [b]LIFT STRUT BRACKETS FRONT:[/b] (2 pieces, Exploded view: Drawing WM5, item 2) [img]http://aeropup-builder.com/wp-content/uploads/2017/12/W027-LIFT-STRUT-BRACKETS-FRONT.jpg[/img] [b]LIFT STRUT BRACKETS REAR:[/b] (2 pieces, Exploded view: Drawing WM5, item 1) [b]PITOT HEAD & PLATE:[/b] (2 pieces, Exploded view: Drawing WM8, item 1) [b]WHITE NYLON TUBE FOR PITOT:[/b] (1 piece, Exploded view: Drawing WM8, item 2)