Wing Progress....slowly but deliberatly....

Now installing Rib Pockets on applicable ribs. These "pockets" are brackets that hold the drag/anti-drag bars in the wings. there are eight of these pockets per wing. I'll post pictures of bending the blanks into the actual pockets in the next couple of days.

Note two markings bordering clean area. This is to aid rib placement during gluing. I don't want any markings in actual spot to be glued. Just place rib centered in between the two marks.

Preparing wing spar for rob gluing. Marked, lightly sanded and cleaned areas to be glued with Acetone.